Promise Technology VTrack M-Class M500p Manual Pagina 228

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 316
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 227
VTrak M-Class Product Manual
220
Replace Cooling Unit Fan – M300f/i/p and M200f/i/p
The blowers (scroll fans) in the cooling units are replaced as individual parts.
There are two fans in each cooling unit. No tools are required for this procedure.
To replace a fan, do the following:
1. Verify that the Fan LED is amber or red and note whether it is Fan 1 or 2.
See the diagram above.
2. Power down the VTrak.
3. Grasp the cooling unit handle and pull it toward you, as shown above.
4. Pull the cooling unit out of the VTrak enclosure.
Cautions
The Cooling Unit is NOT a hot-swappable device. Power-
down the VTrak before removing it.
If power service has failed, do not remove the cooling unit if
the Controller’s Dirty Cache LED is flashing. See “Unsaved
Data in the Controller Cache” on page 289.
Fan 2 LEDFan 1 LED
Vista de pagina 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 315 316

Comentarios a estos manuales

Sin comentarios