Promise Technology SuperTrack TX8658 Manual de usuario descargar pdf (Pagina 63)

Chapter 2: Installation

Setting up WebPAM PRO

The first time you use WebPAM PRO, you must add the Host PC so that

WebPAM PRO will recognize it. You only need to perform this procedure once.

To add the Host PC:

1. In the Tree, click the Subsystem/Host Management icon.

See Figure 35.

Figure 35. WebPAM PRO initial login screen

2. Click the Add Subsystem/Host tab.

3. In the Subsystem/Host Port IP address field, type the IP address of the

Host PC where you installed the SuperTrak TX Controller card.

If you are working at the same Host PC where the SuperTrak card is

installed, you can also type 127.0.0.1 in the IP address field.

Entries such as localhost or the Host PC’s network name do not work for this

function.

Click the Subsystem/Host Management icon

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 237 238

Sin comentarios

Promise Technology SuperTrack TX8658 Manual de usuario Pagina 63