Promise Technology VTrack M-Class M500p Manual descargar pdf (Pagina 18)

VTrak M-Class Quick Start Guide

5. Press Ctrl-A to save these settings and move to the Management Port

configuration screen.

Management Port

By default, DHCP is enabled on VTrak (above). To set Management Port settings

manually, or to view the current settings, you must disable DHCP.

To view the current Management Port settings:

1. Press the arrow keys to highlight DHCP.

2. Press the spacebar to toggle to Disabled.

The current Management Port IP are displayed (above).

3. Record the information on this screen.

4. Press the spacebar to toggle DHCP back to Enable.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Sin comentarios

Promise Technology VTrack M-Class M500p Manual Pagina 18