Promise Technology Network Device EX8650 Manual de usuario descargar pdf (Pagina 165)

Chapter 5: Management with WebPAM PRO

151

Promise Enclosures

To locate a disk array in a VTrak JBOD enclosure, click the Locate DAx button.

The disk status LEDs will blink for one minute to identify the carriers holding the

physical drives used by the disk array.

Figure 7. VTrak drive carrier LEDs

Creating a Disk Array

WebPAM PRO provides three methods of creating a disk array:

• Automatic – Creates a default disk array and logical drive based on

unconfigured physical drives in the system. No user choices. If you have

multiple enclosures, multiple disk array/logical drive sets are created. See

“Creating a Disk Array – Automatic Configuration” on page 152.

• Express – You choose the RAID characteristics and type of application.

Creates a disk array and logical drive(s) based on your input. See “Creating

a Disk Array – Express Configuration” on page 153.

• Advanced – You specify all parameters for a new disk array. One logical

drive will be made automatically when you create the disk array. If you

specify less than the total available capacity, you can use the remaining

space to create additional logical drives now or at a later time. See “Creating

a Disk Array – Advanced Configuration” on page 155.

Disk Status

Power/Activity

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 317 318

Sin comentarios

Promise Technology Network Device EX8650 Manual de usuario Pagina 165