Promise Technology VTrak VTM310i Manual descargar pdf (Pagina 97)

Chapter 4: Management with WebPAM PROe

2. Click on the Enclosures icon.

3. Click on the Enclosure icon.

4. Click on the Physical Drives icon.

5. Click on a Physical Drive icon.

6. In Management View, click on the physical drives in the graphic.

The Disk Status LED will flash to identify the carrier holding the drive.

Figure 7. VTrak M310p/M210p disk carrier LEDs

Physical Drive Settings

The Physical Drive–Settings tab enables you to specify an alias for a physical

disk drive. To make physical drive settings:

1. Click the Subsystem icon in Tree View.

2. Click on the Enclosures icon.

3. Click on the Enclosure icon.

4. Click on the Physical Drives icon.

5. Click on a Physical Drive icon.

6. Click on the Settings tab in Management View.

7. Type an alias into the Physical Drive Alias field.

Maximum of 32 characters. Use letters, numbers, space between words,

and underscore. An alias is optional.

8. Click the Submit button.

Clear Physical Drive Conditions

The Physical Drive–Clear tab enables you to clear certain conditions from a

physical drive. The Clear tab only appears when those conditions are present.

• Stale – The physical drive contains obsolete disk array information.

• PFA – The physical drive has errors resulting in a prediction of failure.

Disk Status

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 261 262

Sin comentarios

Promise Technology VTrak VTM310i Manual Pagina 97