Promise-technology FAST TRAK100TM Manual de usuario descargar pdf (Pagina 11)

FastTrak100 User Manual

Installing The Card

Installing the FastTrak100 controller card in a system is a simple process. The

card fits into any available 32-bit PCI slot on the system’s motherboard (see figure

below).

1. Remove the cover of your system.

2. Remove the inside slot cover of an available 32-bit PCI slot on the motherboard.

3. Install the FastTrak100 controller card into the open slot (see Figure 1 below).

4. Attach your system case’s 2- or 4-pin LED cable to the LED connector on the

FastTrak100 controller card (see figure next page). Make sure that pin 1 on the

connector is aligned with pin 1 of the cable.

5. Fasten the controller card bracket to the system case (see below).

Figure 1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 98 99

Sin comentarios

Promise-technology FAST TRAK100TM Manual de usuario Pagina 11