Promise Technology FastTrak TX2000 Manual de usuario descargar pdf (Pagina 5)

Corrective action for an array in this condition is as follows:

1. Exit the Promise FastBuild utility and shut down the unit.

2. Having identified which drive(s) have failed, open the system unit and take care to

correctly identify the failed drive(s) and replace.

3. The Promise controller’s BIOS banner should remain as shown above; however, this time

Press CTRL-F and in the Main Menu select option <5> to Rebuild the array. The

following screen will appear:

╔════════════════════════════[ Rebuild Array Menu ]════════════════════════════╗

║ ║

║ Array No RAID Mode Total Drv Capacity(MB) Status ║

║ ║

║ Array 1 Mirror 4 ##### Critical ║

║ Array 2 ---- ---- ----- ---- ║

║ Array 3 ---- ---- ----- ---- ║

║ Array 4 ---- ---- ----- ---- ║

║ ║

╚══════════════════════════════════════════════════════════════════════════════╝

╔═══════════════════════════════[ Keys Available ]═════════════════════════════╗

║ ║

║ [▲] Up [▼] Down [ESC] Exit [Enter] Select ║

╚══════════════════════════════════════════════════════════════════════════════╝

Press Enter to select the array. The next screen looks like this:

╔════════════════════[ Rebuild Array – Assign Spare Drive ]════════════════════╗

║ ║

║ Array No RAID Mode Total Drv Status ║

║ ║

║ Array 1 Mirror 4 Critical ║

║ ║

║ Stripe Block: Not Available ║

╚══════════════════════════════════════════════════════════════════════════════╝

╔═════════════════════════[ Select Drive for Rebuild ]═════════════════════════╗

║ Channel:ID Drive Model Capacity(MB) ║

║ 2:Sla MFR MODELNUM ##### ║

║ ║

╚══════════════════════════════════════════════════════════════════════════════╝

╔═══════════════════════════════[ Keys Available ]═════════════════════════════╗

║ ║

║ [▲] Up [▼] Down [ESC] Exit [Enter] Select ║

╚══════════════════════════════════════════════════════════════════════════════╝

Promise Technology FastTrak TX2000 Manual de usuario Pagina 5